- Mean Plasma AUC(0-tau) and Plasma AUC From Time Zero (Pre-dose) to Last Time of Quantifiable Concentration (AUC[0-tlast]) for Salmeterol [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants with asthma and COPD were collected and analyzed for AUC(0-tau) and AUC(0-tlast). AUC(0-tau) is a measure of the amount of drug available at target tissue (in plasma) for a fixed dosing interval (12 hours). AUC(0-tlast) is a measure of the plasma drug concentration from pre-dose to the last measurable concentration.
- Mean AUC(0-tlast) for FP [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants with asthma and COPD were collected and analyzed for AUC(0-tlast). AUC(0-tlast) is a measure of the plasma drug concentration from pre-dose to the last measurable concentration.
- Mean Maximum Observed Concentration (Cmax) and Minimum Observed Concentration (Cmin) of FP [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants with asthma and COPD were collected and analyzed for Cmax and Cmin of FP in the blood. Cmax and Cmin are used to estimate the time at which the activity of the drug will be at its maximum and minimum, respectively.
- Mean Terminal Phase Half-life (t1/2) for FP [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for evaluating t1/2. The t1/2 is the time required for the plasma/blood concentration of the drug to decrease by 50% after the false equilibrium of distribution has been reached.
- Time of Occurrence of Cmax (Tmax) for FP [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for evaluating Tmax. Tmax is a measure of the time required to reach the maximum concentration of the drug.
- Mean Maximum Observed Concentration (Cmax) and Minimum Observed Concentration (Cmin) for Salmeterol [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants with asthma and COPD were collected and analyzed for Cmax and Cmin of Salmeterol in the blood. Cmax and Cmin are used to estimate the time at which the activity of the drug will be at its maximum and minimum.
- Mean Terminal Phase Half-life (t1/2) for Salmeterol [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for evaluating t1/2. t1/2 is the time required for the plasma/blood concentration of the drug to decrease by 50% after the false equilibrium of distribution has been reached.
- Tmax for Salmeterol [ Time Frame: At pre-morning dose; 5, 10, 30 minutes post-dose (PD); and 1, 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for evaluating Tmax. Tmax is a measure of the time required to reach the maximum concentration of the drug.
- Mean Urine Cortisol Excretion Over 0 to 24 Hours Post Dose for FP [ Time Frame: 0-24 hours post dose on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Urine samples of participants were collected to evaluate urine cortisol excretion over 0-24 hours post treatment dose. A 24-hour urine cortisol sample was used to measure the total amount of cortisol excreted in urine in 24 hours. Any differences in systemic exposure as a result of the absorbed steroid component of the two differing inhaled devices should also result in differences in the amount of cortisol excreted in the urine.
- Serum Cortisol Minimum (Cmin) for FP [ Time Frame: Day 10 of each study period (Periods 1-4); Study Day 10 (+/-1) (reference day is Study Day 1 or Randomization day), Period 1; Study Day 20 (+/-1), Period 2; Study Day 30 (+/-1), Period 3; Study Day 40 (+/-1), Period 4 ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of minimum serum cortisol. Any differences in systemic exposure as a result of the absorbed steroid component of the two differing inhaled devices should also result in differences in serum cortisol concentrations.
- Weighted Mean Over 0 to 4 Hours Post Dose of Heart Rate for Salmeterol [ Time Frame: At pre-morning dose; 15, 30, 60, 90 minutes post-dose (PD); and 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
The heart rate (number of heartbeats per unit of time, typically expressed as beats per minute [bpm]) of the participants was monitored for evaluating the weighted mean over the course of 0 to 4 hours post dose. The Capsule-MDPI difference for heart rate was calculated for each participant, and the weighted mean value from the time of the morning dose on Day 10 to 4 hours post dose was calculated. The weighted mean was calculated by using all values at the indicated timepoint contributing to the calculation of the mean but with different weightage.
- Mean of Maximum Heart Rate Over 0 to 4 Hours Post Dose for Salmeterol [ Time Frame: At pre-morning dose; 15, 30, 60, 90 minutes post-dose (PD); and 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
The maximum observed value of heart rate was measured from the time of the morning dose on Day 10 to 4 hours post dose.
- Minimum Diastolic Blood Pressure (DBP), Maximum Systolic Blood Pressure (SBP), and Weighted Mean for DBP and SBP Over 0 to 4 Hours Post Dose [ Time Frame: At pre-morning dose; 15, 30, 60, 90 minutes post-dose (PD); and 2, 4, 8, 10, and 12 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
The diastolic and systolic blood pressure of the participants was measured. The maximum and minimum observed values from the time of the morning dose on Day 10 to 4 hours post dose were measured for SBP and DBP. The weighted mean value from the time of the morning dose on Day 10 to 4 hours post dose was calculated. Weighted mean was calculated by using all values of DBP and SBP at the indicated timepoint contributing to the calculation of the mean but with different weightage.
- Maximum and Weighted Mean Over 0 to 4 Hours Post Dose of the QT Interval Corrected According to Bazett's Formula (QTc[B]) and the QT Interval Corrected According to Fridericia's Formula (QTc[F]) [ Time Frame: At pre-morning dose; 15, 30, 60, 90 minutes post-dose (PD); and 2, 3 and 4 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
The electrocardiogram (ECG) of the participants was taken, and the maximum and weighted mean of QTc(B) and QTc(F) was measured. Weighted mean was calculated by using all values of QTc(B) and QTc(F) at the indicated timepoint contributing to the calculation of the mean but with different weightage. The ECG helps in the assessment of the condition of the heart. The QT interval gives the measure of the heart rate, and the cQT interval gives the corrected value.
- Weighted Mean Over 0 to 4 Hours Post Dose of Plasma Potassium and Minimum (Min) Plasma Potassium [ Time Frame: At pre-morning dose; 30, 60 minutes post-dose (PD); and 2 and 4 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of weighted mean over 0 to 4 hours post dose and the minimum plasma potassium level. Weighted mean was calculated by using all values of plasma potassium at the indicated timepoint contributing to the calculation of the mean but with different weightage.
- Weighted Mean Over 0 to 4 Hours Post Dose and Maximum Plasma Glucose [ Time Frame: At pre-morning dose; 30, 60 minutes post-dose (PD); and 2 and 4 hours PD on Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of weighted mean over 0 to 4 hours post dose and the maximum plasma glucose level. Weighted mean was calculated by using all values of plasma glucose at the indicated timepoint contributing to the calculation of the mean but with different weightage.
- Mean Basophils, Eosinophils, Lymphocytes, Monocytes, Total Neutrophils, Platelet Count, and White Blood Cell (WBC) Count [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of basophils, eosinophils, lymphocytes, monocytes, total neutrophils, platelet count, and WBC count. Data are reported for the first (1st) and second (2nd) administration (admin) of FP/salmeterol via MDPI or capsule-based inhaler. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Hemoglobin and Mean Corpuscular Hemoglobin (MCH) Concentration [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of mean hemoglobin (mean level of hemoglobin in the whole blood sample) and MCH concentration. The MCH concentration is the average concentration of hemoglobin in a red blood cell. Hemoglobin is the red pigment in the blood, and it is reponsible for carrying oxygen. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Red Blood Cell (RBC) Count and Reticulocytes [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of RBC and reticulocytes count. Reticulocytes are immature red blood cells. Normally, about 1% to 2% of the red blood cells in the blood are reticulocytes. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Corpuscule Hemoglobin (MCH) [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of MCH. MCH is the average mass or amount of hemoglobin per red blood cell in a sample of blood. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Corpuscle Volume (MCV) [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of MCV. MCV is a measure of the average red blood cell size that is reported as part of a standard complete blood count. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Hematocrit [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of hematocrit. The hematocrit is the percentage of the RBCs in the blood. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Albumin and Total Protein [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Alkaline Phosphatase (AP), Alanine Amino Transferase (ALT), Aspartate Amio Transferase (AST), and Gama Glutamyl Transferase (GGT) [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of AP, ALT, AST, and GGT. All of these parameters are measured to help assess the condition of the liver. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Direct Bilirubin (DB), Total Bilirubin (TB), Creatinine, and Uric Acid [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of DP, TB, creatinine, and uric acid. DB and TB are measures that help assess the condition of the liver, and creatinine and uric acid are measures that help assess the condition of the kidneys. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Mean Calcium, Chloride, Glucose, Potassium, Sodium, Carbon Dioxide (CO2) Content/Bicarbonate (Bicar), and Urea/Blood Urea Nitrogen (BUN) [ Time Frame: Day 10 of each study period (P): Study Day (SD) 10 (reference day is SD 1 or Randomization day), 20, 30, and 40 (+/-1) for P 1, 2, 3, and 4, respectively ] [ Designated as safety issue: No ]
Blood samples of participants were collected for the evaluation of calcium, chloride, glucose, potassium, sodium, carbon dioxide (CO2) content/bicarbonate, and urea/BUN. All of these parameters are measured to help assess the condition of the kidneys. The timing of the first and second administrations depended on the randomization schedule. If the treatment sequence received was "ABBA," then Days 10 and 40, respectively, correspond to the first and second administrations for treatment A.
- Number of Participants With an Adverse Event (AE) [ Time Frame: Randomization (Day 1) up to Follow-up (Days 47-50) ] [ Designated as safety issue: No ]
An AE is defined as any untoward medical occurrence in a patient or clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product.
|